The PR-PF23 Automatic PVC Plastic Coil Forming Machine produces plastic spiral binding coils with diameters from 6mm to 25mm and lengths from 140mm to 450mm, providing an efficient manufacturing solution for notebook, calendar and bookbinding supply producers.
Speed
0.46m/s
Pneumatic Operation
6–8 bar
Machine Size (L*W*H)
1450 × 1200 × 1400mm
| Model | PR-PF23 |
| Plastic coil diameter | 6~25mm (bigger is possible) |
| Coil length | From 140mm ~450mm |
| Air supply | 6~8 bar |
| Max forming speed (cycles/min) | 0.46m/s |
| Machine Weight | 585kg |
| Dimension | 1.45* 1.2* 1.4m |
| E.G: diameter 18mm, 1 min 2s can make 456 loops=38 loops x 12pcs | |
Loads bulk rolls of PVC plastic filament raw material, and feeds the material to the forming station at a uniform speed under tension control, to support continuous production of the machine.
Serves as the central human-machine control hub. Operators can set forming temperature, coil pitch, cutting length and production speed here. It is integrated with temperature controllers and start/stop buttons, for real-time monitoring of equipment running status.
As the core forming station of the machine, it heats and softens the plastic filament, and continuously winds the straight filament into standard-pitch spiral single coils with a precision die. It directly determines the diameter and pitch accuracy of finished coils.
Pulls the continuously formed spiral coil forward at a constant speed. Three axial rollers press the plastic filament tightly against the forming mandrel during the forming process to stabilize the spiral shape and pitch accuracy of the coil. It also cuts the coil precisely to the preset length, ensuring consistent length and flat, clean cuts for each finished coil.
Receives the cut finished coils and transfers them smoothly to the discharge table, preventing coil deformation during conveying and ensuring smooth discharging.
Collects the formed and cut plastic coils. Its stepped structure allows neat arrangement, easy counting of finished products, and convenient access for subsequent packaging.
Every machine passes our 4-point inspection before leaving the factory:
| ①Electrical safety & wiring check | ②Servo / PLC system calibration |
| ③12-hour continuous run-in test | ④Final visual & packing inspection |